CV glass

What is CV glass?

The glare from windows and lamps can be a great nuisance when you want to enjoy your fireplace with glass sides. There is a risk that the view will be ruined by reflections in the glass.

CV Glas stands for Clear View Glass. This type of glass helps to reduce reflections in the glass. There is a thin film on the glass, which helps to remove reflections.

The majority of our DRU gas fireplaces are available with the option of CV glass, which removes reflections on the glass. So that you get an unobstructed view of the fireplace.

Clear View glass is particularly suitable for fireplaces where there is a background. Such as front fireplaces or corner fireplaces. Especially if the background of the fireplace is black, then the reflections will be more visible.

Read more about the benefits of DRU gas fireplaces

Cleaning CV glass

To get the optimal view of the flames, it is necessary to clean both the inside and outside of the fireplace’s glass pane regularly.
CV glass must be cleaned with glass cleaner from DRU, otherwise there is a risk that the film can be damaged.

1. Before lighting the fireplace for the first time, it is important that fingerprints are thoroughly removed from the glass, otherwise it can burn. It must be cleaned with the microfiber cloth and DRU spray (1) and then with DRU window cleaner (2).
2. After the fireplace has been used for the first time, cool down the appliance and then clean the pane again with DRU Window Cleaner (2) Repeat cleaning if there is stubborn or visible dirt.

Instructions for use of DRU spray (1)

• The windows must be cooled before cleaning.
• Spray DRU spray directly onto the window.
• Then rub the window completely clean and wipe with the microfiber cloth

Instruction manual for DRU window cleaner (2)

• Shake well before use.
• The windows must be cooled before cleaning
• Apply a small amount of DRU window cleaner to a slightly damp microfiber cloth.
• The cloth must not be wet
• Rub DRU window cleaner all over the window.
• Leave it on for a few minutes, then wipe the window with a dry microfiber cloth
• Repeat the treatment for stubborn dirt. Rub a little harder if needed to remove the dirt

Important

• Fingerprints and dirt must be removed so that they do not burn.
• Use only DRU window cleaner.
• Always use microfiber cloths.
• Other materials such as paper towels, paper, steel wool, etc., can scratch the window.
• The microfiber cloths are washable.
• Wear cotton gloves while cleaning so you don’t leave new fingerprints.
• Repeat cleaning regularly if there is any stubborn or visible dirt

https://youtu.be/Z2iRnw7YAB0

Warning

• Keep out of reach of children
• Avoid inhaling steam
• Avoid contact with the skin, get fabric on the skin, wash immediately with large amounts of soap and water
• Do not empty into sewer drains.